The Made in Italy diving watch is part of the new permanent Unimatic Classic series, featuring high legibility dial in black matte with Super-LumiNova® C3 pale green for the best possible performance in any conditions. The permanent series is a functional design evolution of the Unimatic references and stands as an archetype of the ideal performance timepiece. It is distinct with a new ‘CLASSIC’ writing on the dial as well as on the screw down caseback engraved with ‘Rosa dei Venti’ diagram.
The reference is part of the new permanent Unimatic Classic series
Comes in the two-slots Unimatic Tough Case
Modello Tre Classic ref. UC-3 is the Made in Italy chrono-diver watch. It features a two-eyes black matte dial with markers in Super-LumiNova® C3 pale green lume matching the lumed dot on the minimal black aluminium diver insert and an off-white closed second rail and dial trims.
Time is indicated thanks to the matching phantom ladder hands set and the black reverse lollipop second hand with off-white tip. The 2.5 mm thick double domed anti-reflective sapphire crystal provide the best performance in every light condition.
The solid 316 brushed stainless steel case, the screwed-in 2 mm thick caseback, the 8 mm diameter crown coupled with fat 5.5 mm screw-in pushers, together with the high quality gaskets set provide a water resistance tested individually to 30 atm=300m=1000ft.
Timing accuracy is guaranteed by the VK64 mech-quartz movement tuned to 32,768 Hz for 3 years battery life, with 1/5 of a second indication plus 60 minutes counter. Comes on a black heavy-duty Unimatic nylon nato strap with a stainless steel brushed hardware signed UNIMATIC.
The caseback features an Unimatic “Rosa dei venti” diagram. The watch is covered by a 24 months worldwide warranty.
About Unimatic
Unimatic was born as a continuous watchmaking research lab to offer watches able to combine good design, iconic elements and the latest technical solutions blending a perfect balance between quality and price.
SPECIFICATIONS
300m = 1000ft = 30atm WR
Diameter 40mm case with 41,5mm bezel
120 clicks mono-directional security bezel
2.5mm thick double domed sapphire
Anti-reflective coating on lens inner-side
Black aluminium insert with raised lume dot
316 stainless steel case
Brushed finish
Fat screw-down chrono pushers
Black matte, two sub-dial
Super-LumiNova® C3 pale green
Off-white open second rail and dial trims
Meca-quartz calibre Seiko VK64
1/5 second sweep second hand with mechanical reset
Accuracy -20/+20 s/month
Antimagnetic ≥1600 A / m
Black heavy duty Unimatic nylon nato strap
Stainless steel brushed hardware signed UNIMATIC
Unimatic “Rosa dei venti” screwdown caseback
Unimatic tough case, warranty card with unique ID seal
